How do I properly turn on the SpyDrive? (UDVC)

How do I properly turn on the SpyDrive? (UDVC)

Before turning on the device, make sure that the device is fully charged and a memory card has been properly inserted. Then:

  1. Press and hold the Mode Function Key button for 2 seconds then let go.
  1. The indicator light on the device will lit up and the device will automatically detect the memory card.
  1. Once memory card is detected, the SpyDrive indicator light will blink once then stays solid. This would mean that the device is in standby mode and is ready for use.

NOTE: If memory card is not detected, the device will turn off after the indicator light flashes 3 times. If the memory card detected is full, the device indicator light will flash 6 times then will automatically turn off.

    • Related Articles

    • Why does my SpyDrive keep on shutting off every time I turned it on? (UDVC)

      There are different reasons why your device would shut off when you turn it on. These reasons are as follows: A. Low Battery If the battery of your SpyDrive is low, when you turn it on the indicator light will flash for 3 time then device shuts offs. ...
    • How to download my video recordings? (SpyDrive UDVC)

      Power OFF your SpyDrive. Make certain the microSD card is properly installed in your SpyDrive. For good measure, push it in to eject it, then push it in again to lock it back into the SpyDrive memory card slot. Locate a USB 2.0 port directly on the ...
    • How to set the time and date on SpyDrive? (UDVC)

      To set or edit the time and date of your device, make sure that the memory card is inserted and follow the steps below:  Turn off SpyDrive and connect it to your computer's USB port. Open "My Computer" or equivalent and look for the removable disk ...
    • How long do I need to charge my SpyDrive camera? (UDVC)

      The SpyDrive's rechargeable lithium battery can be charged using the USB cable that came with the camera (hooked to your computer's USB port). It gets full charged in just 2 hours. With a fully charge SpyDrive, it can last for weeks in standby mode ...
    • How to record a video with SpyDrive? (UDVC)

      Before turning on the camera, make sure that a memory card has been inserted and the camera is fully charged. Turn on the camera. Press and hold the Mode Function button for 2-3 seconds. (Refer to the image below for the different parts of the ...