How do I setup a system password to secure my device? (AcornTrail ACNSTD)

For the device to be protected by a system password, do the following steps:

1. Use UP and DOWN button to find the "Password Set" option and press LEFT and RIGHT button to choose either "On" or "Off".

2. Once the function is turned on, press OK and set the password.

3. Use the LEFT and RIGHT button to alternate between each data slot.

4. Use UP and DOWN button to change the number. Press OK to confirm the changes and press MENU to exit.

Related Articles
Password Reset / Lost Password (AcornTrail ACNSTD)
If you have locked out the device using its password protection or have forgotten the password, please contact us so we could send you the firmware file needed to reset the device configuration settings together with a detailed instructions.
How do you proctect the device from unauthorized access? (AcornTrail ACNSTD)
You can setup a system password for the device to be protected from unauthorized access. Once system password is setup the device cannot enter the Preview Test mode without the password. Below are the steps on how to setup a system password: 1. Press ...
What are the supported file system formats? (AcornTrail ACNSTD)
If the device uses an SD card larger than 2GB, the supported file system format is FAT32. When formatting using windows, this is typically the default in the Microsoft Windows format utility. You should not have to make any changes when formatting ...
Do you have an online Users Guide? (AcornTrail ACNSTD)
Yes, Please have a look at it here: https://www.electroflip.com/UserGuides/AcornTrail.pdf
What Memory Card should I use? (AcornTrail ACNSTD)
Please make sure you are using a standard SD / SDHC memory card (class 4) and NOT an Ultra or Extreme card (above class 4). The memory card should not have printing with the word "Ultra", or "Extreme", or ‘C’ symbol with 10 in it or ‘U’ symbol with 1 ...

Related Articles