What Memory Card should I use? (SpyDrive UDVC)

What Memory Card should I use? (SpyDrive UDVC)

Please make sure you are using a standard microSD/microSDHC memory card (class 4) and NOT an Ultra card (above class 4). The memory card should not have printing with the word "Ultra" or ‘C’ symbol with 10 in it or ‘U’ symbol with 1 or 3 in it.

The size compatibility is 8GB - 32GB.

If you use an ultra memory card it will not recognize it, or it may record one or two videos but not beyond that point. In any case it does not damage the memory or the camera system.

Please see some guidelines on what to look out for (circled in yellow) in buying microSD memory card.

    • Related Articles

    • How to download my video recordings? (SpyDrive UDVC)

      Power OFF your SpyDrive. Make certain the microSD card is properly installed in your SpyDrive. For good measure, push it in to eject it, then push it in again to lock it back into the SpyDrive memory card slot. Locate a USB 2.0 port directly on the ...

    • How do I properly turn on the SpyDrive? (UDVC)

      Before turning on the device, make sure that the device is fully charged and a memory card has been properly inserted. Then: Press and hold the Mode Function Key button for 2 seconds then let go. The indicator light on the device will lit up and the ...

    • Why does my SpyDrive keep on shutting off every time I turned it on? (UDVC)

      There are different reasons why your device would shut off when you turn it on. These reasons are as follows: A. Low Battery If the battery of your SpyDrive is low, when you turn it on the indicator light will flash for 3 time then device shuts offs. ...

    • What are the product specifications of SpyDrive? (UDVC)

      The table below shows the product specifications of SpyDrive.  Video Format  AVI  Video Resolution  1280*960  Frame Rate of Video  30fps  Battery Record Time  60 minutes  Charging Voltage  DV - 5V  Interface  USB 2.0  Memory Type  TF Card (microSD up ...

    • How to record a video with SpyDrive? (UDVC)

      Before turning on the camera, make sure that a memory card has been inserted and the camera is fully charged. Turn on the camera. Press and hold the Mode Function button for 2-3 seconds. (Refer to the image below for the different parts of the ...