Please make sure you are using a standard microSD/microSDHC memory card (class 4) and NOT an Ultra card (above class 4). The memory card should not have printing with the word "Ultra" or ‘C’ symbol with 10 in it or ‘U’ symbol with 1 or 3 in it. The ...
The table below shows the product specifications of SpyDrive. Video Format AVI Video Resolution 1280*960 Frame Rate of Video 30fps Battery Record Time 60 minutes Charging Voltage DV - 5V Interface USB 2.0 Memory Type TF Card (microSD up ...
Before turning on the device, make sure that the device is fully charged and a memory card has been properly inserted. Then: Press and hold the Mode Function Key button for 2 seconds then let go. The indicator light on the device will lit up and the ...
Power OFF your SpyDrive. Make certain the microSD card is properly installed in your SpyDrive. For good measure, push it in to eject it, then push it in again to lock it back into the SpyDrive memory card slot. Locate a USB 2.0 port directly on the ...
To set or edit the time and date of your device, make sure that the memory card is inserted and follow the steps below: Turn off SpyDrive and connect it to your computer's USB port. Open "My Computer" or equivalent and look for the removable disk ...
The SpyDrive's rechargeable lithium battery can be charged using the USB cable that came with the camera (hooked to your computer's USB port). It gets full charged in just 2 hours. With a fully charge SpyDrive, it can last for weeks in standby mode ...
There are different reasons why your device would shut off when you turn it on. These reasons are as follows: A. Low Battery If the battery of your SpyDrive is low, when you turn it on the indicator light will flash for 3 time then device shuts offs. ...
Make sure that a media player is installed on your computer. For Windows computer, make sure that Windows Media Player is installed completely. There are instances that Windows Media Player looks installed on the computer but has to be configured in ...
Before turning on the camera, make sure that a memory card has been inserted and the camera is fully charged. Turn on the camera. Press and hold the Mode Function button for 2-3 seconds. (Refer to the image below for the different parts of the ...